Fixing a Brass Pipe: Tips from Brass Pipe Suppliers

in Brass

The water supply line is an essential component of a plumbing system. It is connected to the central supply system. This is composed of water pipes, gate bulbs, and water meters. It delivers water from the central water storage to the water pumps of houses.

Brass metals are the primary components of a plumbing system. Brass is a smooth metal with a brownish shade. Brasses are less susceptible to friction and oxidation. They do not quickly corrode and tarnish. In the same way, they are less prone to rust. This makes brass a suitable material for water pipes and tubes. In the United States, plumbing systems are made up of brass metals. Brass pipes and tubes are more durable than plastic or other metal pipes.

Nevertheless, strong external forces can damage brass pipes and tubes. These can cause leaks on the plumbing system. Immediate repair is essential to prevent reduction of water supply in outlets. Do you have leaks on your brass pipes? Brass suppliers have provided a three-step procedure to fix damaged brass pipes. The basic method for brass pipe repair is soldering.

Prepare the soldering tools and brass pipe: Soldering tools for brass pipe repair are composed of solder, propane torch, emery cloth, and flux. Brass pipe suppliers recommend the use of a propane torch to cover leaks on pipes. A propane torch has a solder regulator. This controls heat level during the soldering process. Prepare the new brass pipe for replacement. Wear gloves while soldering pipelines. Gloves protect your hands and arms from hot soldering drips.

Cut and prepare the brass pipes: Mark the leak on the pipe. Turn off the gate valves of your plumbing system. Measure the length of the leaked area. Cut the leaked area on the tube, and cut the new tube with the same measurement. Brass pipe suppliers use tube cutters in cutting brass pipes. Clean the edges and inside spaces of the new brass tube.

Heat the joints of the new pipe: Heat the joints of the new pipe using a propane torch. Move the cone of the torch back and forth. This evenly heats the perimeter of the joint. Adjust the heat level depending on the texture of the pipe. Brass pipe suppliers recommend heating joints one at a time. After this, let the solder cool.

Author Box
Lawrence Halter has 1 articles online

For detailed information, please visit us at www.RotaxMetals.net

Add New Comment

Fixing a Brass Pipe: Tips from Brass Pipe Suppliers

Log in or Create Account to post a comment.
     
*
*
Security Code: Captcha Image Change Image
This article was published on 2010/12/16